[Tut]How To Fix Christmas Lights

[-Xenon-]

* Step 1: Make sure you have your flashdmp.bin file
* Step 2: Rename the flashdmp.bin file to updflash.bin
* Step 3: Put your USB or any other storage device in your computer
* Step 4: Format that storage device to FAT32 (default) and Restore Device Defaults
* Step 5: Quick format your storage device
* Step 6: Put the file you just renamed (updflash.bin) inside the storage device (not usb explorer)
* Step 7: Unplug ALL cords from jtag for about 45 seconds then plug them back in along with the usb you put your updflash.bin file on
* Step 8: Turn on the jtag by pressing the eject button
* Step 9: If your usb isn't read then repeat step 7
* Step 10: If you did this right you should see a Update countdown in xell
* Step 11: When the update is complete unplug all cords and your usb and leave it unplugged for about 45 seconds
* Step 12: Plug in cords and turn on jtag using the power button
* Step 13: If you did this right then christmas lights should be Gone

[IW_Graphics]

Nice TUT easy to follow

[YungBeast]

Very nice. Easy to understand.